| SIFFOFIN CIKIN SAUKI | ||||||||
| (mm) diamita maras muhimmanci | (mm) diamita maras muhimmanci | |||||||
| Kowa | Guda ɗaya | Misali na masana'antu na t4090) | HP (darajar daraja) | |||||
| 200 \ 400 | 450 \ 500 | 600 \ 700 | 600 \ 700 | 450 \ 500 | 450 \ 500 | |||
| Kariya ta lantarki | Kantashin jirgin ruwa | μqm | ≤7.0 | ≤7.5 | ≤7.5 | 5.6-6.5 | 5.8-6.7 | 5.8-6.8 |
| Kan nono | ≤6.3 | ≤6.3 | ≤6.3 | 3.5-4.3 | 3.5-4.2 | 3.5-4.2 | ||
| Yawan yawa | Kantashin jirgin ruwa | g / cm³ | ≥1.60 | ≥1.60 | ≥1.60 | 1.7.-1.75 | 1.72-1.74 | 1.70-1.72 |
| Kan nono | ≥1.72 | ≥1.72 | ≥1.72 | 1.80-1.82 | 1.82-1.84 | 1.82-1.85 | ||
| Karfin karfi | Kantashin jirgin ruwa | MPA | ≥10.5 | ≥10 | ≥8.5 | 12.0-15.0 | 11.0-15.0 | 10.0-12.0 |
| Kan nono | ≥17.0 | ≥17.0 | ≥17.0 | 22.0-26.0 | 22.0-26.0 | 24.0-28.0 | ||
| Cte | Kantashin jirgin ruwa | 10 ℃ | ≤22.4 | ≤22.4 | ≤22.4 | 1.7-2 | 1.6-2.0 | 1.6-2.0 |
| Kan nono | ≤2.2 | ≤2.2 | ≤2.2 | 1.4-1.8 | 1.4-1.8 | 1.4-1.8 | ||
| Modulus na roba | Kantashin jirgin ruwa | GPA | ≤14.0 | ≤14.0 | ≤14.0 | 9.0-12.0 | 9.0-11.5 | 9.0-11.5 |
| Kan nono | ≤16.0 | ≤16.0 | ≤16.0 | 14.0-16.0 | 15.0-18.0 | 15.0-18.0 | ||
| Toka | Kantashin jirgin ruwa | % | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
| Kan nono | ||||||||
| Nominal diamita | Yankin yanki na giciye | YT / T4090 (Standararru) | HP (Standard HP) | |||
| Haɗin halin yanzu | Yankunan yau da kullun | Wanda aka yarda da shi Loading na yanzu | Yankunan yau da kullun | |||
| a | mm | cm² | A | A / cm² | A | A / cm² |
| 14 | 350 | 937 | 17400-24000 | 17-27 | 18270-252200 | 19-26 |
| 16 | 400 | 1275 | 21000-31000 | 16-24 | 22050-550 | 17-26 |
| 18 | 450 | 1622 | 25000-40000 | 15-24 | 26250-42000 | 16-26 |
| 20 | 500 | 2000 | 30000-48000 | 15-24 | 31500-50400 | 16-25 |
| 22 | 550 | 2427 | 34000-53000 | 14-22 | - | - |
| 24 | 600 | 2892 | 38000-58000 | 13-21 | - | - |
| 28 | 700 | 3935 | 45000-72000 | 12-19 | - | - |
| Jagora don yin nazarin matsalolin lantarki | |||||||
| Dalilai | Bakar jiki | Cin gashin kan nono | Liwata | Tial spalling | Bolt asarar | Hadewa | Amfani |
| Ba tare da izini ba | ◆ | ◆ | |||||
| Mai nauyi scrap a caji | ◆ | ◆ | |||||
| Canjin canzawa ya yi yawa | ◆ | ◆ | ◆ | ◆ | ◆ | ◆ | |
| Lokaci na rashin daidaituwa | ◆ | ◆ | ◆ | ◆ | ◆ | ||
| Juyawa lokaci | ◆ | ◆ | ◆ | ||||
| Wuce gona da iri | ◆ | ||||||
| Matsa matsin lamba mai yawa ko babba | ◆ | ◆ | ◆ | ||||
| Rufin aljihun ƙwayoyin cuta na lantarki tare da lantarki | ◆ | ◆ | ◆ | ||||
| Ruwa ya fesa akan lantarki a sama rufin | △ | ||||||
| Scrap prehehating | △ | ||||||
| Sakandare | ◆ | ◆ | ◆ | ◆ | ◆ | ||
| Sakandare ya yi yawa | ◆ | ◆ | ◆ | ◆ | ◆ | ◆ | |
| Ikon ikon wuta ya yi ƙasa | ◆ | ◆ | ◆ | ||||
| Amfani da mai yayi yawa | ◆ | ◆ | ◆ | ◆ | |||
| Amfani na oxygen yayi tsayi | ◆ | ◆ | ◆ | ◆ | |||
| Gagara na dogon lokaci daga Taping don Tatsa | ◆ | ◆ | |||||
| Ambaliya ambaliya | ◆ | ◆ | |||||
| Datti hadin gwiwa | ◆ | ◆ | |||||
| Takaitaccen riƙe kayan aiki da ƙarfi | ◆ | ◆ | ◆ | ||||
| Karancin hadin gwiwa | ◆ | ◆ | ◆ | ||||
| SAURARA: △ yana nuna ƙara yawan aiki. ◆ Bayan haka yana nuna raguwa. | |||||||
Wutarfin wutar lantarki mai hoto da aka samar ta hanyar da aka yi da ƙwayar ƙwayar ƙwayar ƙwayar ƙwayar ƙwayar ƙwayar ƙwayar ƙwayar ƙwayar ƙwayar ƙwayar ƙwayar ƙwayar ƙwayar cuta, kuma ana yin shi ta hanyar lissafi, calcing, calcing, latsa, hoto, da inji. Suna da masu yin amfani da wutar lantarki a cikin wani Arc a cikin wutar wutar lantarki na wutar lantarki zuwa zafi da narke kayan tander. Dangane da alamun alamun su, ana iya raba su zuwa wayoyin salula na yau da kullun, wayoyin salkokin masu zane-zane, da kuma ma'abutan wayar salula. Graphite electrodes are commonly used in electric arc furnaces (for steelmaking) and submerged arc furnaces (for producing ferroalloys, pure silicon, phosphorus, calcium carbide, etc.). Da kuma tsayayyen wuta, kamar su thefization tarkon samar da kayan zane mai zane, gilashin na narke wuta na wutar lantarki don samar da yashi na lu'u-lu'u. Za a iya sarrafa bisa ga buƙatun abokin ciniki, galibi ana amfani da shi ga Arc trence karfe.
Amfani da kaya
(1) Karuwar rikicewar mold tetometry da kuma rarrabuwa na aikace-aikacen kayan aiki sun haifar da mafi girma buƙatu don samar da daidaituwar injunan su. Amfanin abubuwan da ke tattare da abubuwan da ke tattare da masu zane suna aiki mai sauƙi, da tsaftace abubuwan cire kayan aikin, da ƙananan asarar hoto. Sabili da haka, wasu ƙungiyar da abokan cinikin su na na'urorin na'urokin injunan su ba za su yarda da kararrawa na Uwabil ɗin ba kuma sun kunna wutar lantarki. Bugu da kari, wasu masu karfin wayoyin da aka fifita su ba za a iya yi su da tagulla ba, amma hoto mai sauki ne a yi sauki da kuma ruwan tabarau na tagulla sunfi sosai, yana sa su m don sarrafa manyan elecrodes. Wadannan dalilan sun haifar da wasu mahimman abokan ciniki na na'urorin da ke amfani da su ta amfani da abubuwan lantarki.
(2) Abubuwan da aka yi amfani da su suna da sauƙin aiwatar kuma suna da saurin sarrafa sauri fiye da ƙarfe na ƙarfe. Misali, ta amfani da fasaha na miliyata don aiwatar da hoto, saurin aiki shine 2-3 sau da sauri fiye da sauran sarrafa ƙarfe, yayin da eleveld na ƙarfe suna buƙatar Manual Grinding. Hakazalika, idan ana amfani da cibiyoyin zane-zanen zane mai sauri don ƙirƙirar abubuwan lantarki, saurin zai yi sauri, kuma babu matsalar ƙura. A cikin waɗannan hanyoyin sarrafa na'ura, zaɓi Kayan aiki tare da wahalar da ta dace da kuma hoto na iya rage lalacewa na kayan aiki. Idan an kwatanta lokacin da milkiyar kayan aikin lantarki da ruwan tabarau, wayoyin salula, wayoyin zane suna 67% fiye da ruwan jan karfe. Gabaɗaya, a fitar da injin, amfani da lantarki mai zane-zane, yana da sauri fiye da amfani da jan karfe maraƙi. Ta wannan hanyar, lokacin aiki yana raguwa sosai, yayin da kuma rage farashin masana'antu.
(3) Tsarin abubuwan da aka yi na shirin zane-zane ya banbanta da na Uwararriyar Kebara ta gargajiya. Yawancin kayayyaki masu yawa suna da abubuwa daban-daban na ajiyar abubuwa don miking da electrodes iri ɗaya, wanda ke rage yawan cad / cam da sarrafa inji. Wannan kadai ya isa ya inganta daidaito na ƙwayar ƙwayar cuta.
Sarrafa siffofin kayan zane zane
Akwai manyan nau'ikan sarrafa na'urori na hoto: Hanyar girgizawa, CNC ta atomatik ƙirƙirar hanyar, hanyar sarrafa injiniya.
Za'a iya sarrafa kayan zane mai hoto ta amfani da hanyoyin da suke juyawa, milling, hinging, da niƙa. Bugu da kari, kayan zane mai zane ne don tashi ash yayin sarrafa injiniya, wanda ke da tasirin mummunan tasiri kan kayan aiki da masu aiki.
Sarrafa siffofin kayan zane zane
(1) Tsarin aiki mai tsawo. Tsarin samarwa na wayoyin salula na yau da kullun suna kusan kwanaki 45, da kuma sake fasalin abubuwan da obrodes masu zane-zane sun fi kwana 70. Koyaya, tsarin samarwa na kayan kwalliyar kayan kwalliya wanda ke buƙatar haɓakawa da yawa.
(2) yawan amfani da makamashi. A samar da 1 ton na talakawa sanyaya waƙoƙin lantarki na buƙatar kimanin kuzari 6000 na buƙatar ƙoshin ƙoshin gas ko gas na barbashi na ƙwaya da foda.
(3) Akwai matakan samarwa da yawa. Tsarin samarwa ya hada da ragin kayan abinci, murƙushe da niƙa, lissafi, dane, gasa, impregnation, hoto, da sarrafa kayan aiki, hoto, da sarrafa injiniya. Abubuwan sa suna buƙatar kayan aikin na musamman da kuma tsari tare da tsare-tsaren na musamman, kuma saka hannun jari yana da yawa, tare da lokacin biyan hannun jari.
(4) An samo takamaiman adadin ƙura da lahani, kuma ya zama dole don ɗaukar wadataccen iska da kuma matakan kare muhalli don magance gas mai cutarwa.
(5) Abubuwan da ake buƙata carbonaceous ragon kayan abinci don samarwa, kamar filin wasan petrooleum, da samfuran samfuran masu gyara ne da kayan masarufi. Ingancin da kwanciyar hankali da kwanciyar hankali na albarkatun ƙasa suna da wahala cikakkiyar gargajiya, musamman mayafin coke, da kuma ingantaccen filin da aka yi amfani da shi a babban ƙarfin lantarki da kuma mai zane-zane mai zane. Yana da gaggawa ne ga masana'antar sarrafa mai da China don haɗa mahimmancin aiki da aiki tare.
Aikace-aikace
(1) amfani da wutar lantarki na Arc karfe
(2) da aka yi amfani da shi don hayan wutar lantarki
(3) amfani da kayan jingina
(4) da aka yi amfani da shi don shirya samfuran da ba daidai ba
Gabatarwa Kamfanin
Hannan Toda New Mataimakin Fasaha Co., Ltd Kamfanin yana da ƙarfi na tattalin arziki da kuma tallafin fasaha mai mahimmanci, kuma ya haɓaka samfuran samfuran zane na cikin gida, yana ba da abokan ciniki tare da sabis na kayan aiki zuwa zane da sarrafawa. An yi amfani da samfurin sosai a fannoni daban-daban, gami da masana'antar sarrafa lantarki, masana'antar sarrafa lantarki, masana'antu na Aerospace, da masana'antar mota. Muna ba da abokan ciniki tare da ingantattun kayayyaki da sabis na gaske, ci gaba da koyo da kuma bincika fasaha, kuma sun sami alaƙar haɗin gwiwa tare da yawancin mutane da yawa.
